How to remove the chip from a Huawei

Hometechno_tricksHow to remove the chip from a Huawei

How to remove the chip from a Huawei

1. Prepare Huawei for chip removal:

2. Find the chip.

3. Carefully remove the chip:

  • Press your thumb against the chip top until you feel your finger go through the chip.
  • Pry until the piece pops out of place.

4. Make the final settings on the Huawei:

  • Replace the battery and tail cover.
  • Switch on the phone and, if necessary, do the initial setup so that the phone is ready for use.

How can I remove the chip?

How do I insert or remove the SIM card? Insert the SIM card removal tool into the side of the phone to release the SIM tray, Insert the nano SIM card into the tray, Slide the tray to put it back into the phone. Close the chamber door to make sure everything is in place. Now you can start using the phone.

How do I open the SIM card slot?

A micro/nano SIM tray has a small hole on the side that pushes a small lever/spring that makes the tray pop out a few millimeters and can be removed by hand. Check that there is a threaded shaft button on the board to remove the board, as well as a locking button to reattach the board. Larger SIM card trays require a special tool (pins) to remove them. Some smartphones come with this tool. Otherwise, you can buy a tool kit, which usually contains several tools and several sticks of different lengths, or a specific SIM pin depending on the smartphone model.

Where does the chip for a Huawei go?

In general, the tray is usually located on the right or left side of the smartphone or at the top next to the microphone. Once we have found the board, we will insert the skewer or needle into the opening hole. When it is open, we take out the current chip (it is important to make sure to maintain the corresponding position, with the metal contacts facing the inside of the board). Then we insert the new chip with the metal contacts facing the inside of the tray.
Finally, we close the fold the opposite way it was opened, with the skewer or with the needle.

How to remove the chip from a Huawei

Huawei is a very popular phone manufacturer. Many of their phones come with a SIM chip that allows users to connect to mobile phone networks. Sometimes you need to remove the chip to make changes to your phone, so it's important to know how to do it safely.

Instructions for removing the SIM chip

Helpful hints

  • Be sure to be careful when removing the chip. Use a paper clip or a small screwdriver to gently push it out of the device to avoid damaging the devices and make sure the phone is working properly.
  • This process can be difficult, so don't be afraid to take your phone to a service center for help if you have any problems.

Once you know how to remove the chip from a Huawei, you can make changes to your device with confidence. Always be careful when handling an electronic device to avoid injuring yourself and damaging your phone.

Randomly suggested related videos:
Huawei P20 and P20 Pro – How to Insert SIM Cards

How to insert the SIM cards in Huawei P20 and P20 Pro smartphone.How to Use One-Hand UI on Huawei P20 Lite, P20, P20 Pro, Nova 3E :…

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *